Performance planning
This section details the run-time characteristics of a typical Prisma Cloud deployment. The information provided is for planning and estimation purposes.
System performance depends on many factors outside of our control. For example, heavily loaded hosts have fewer available resources than hosts with balanced workloads.
Scale
Prisma Cloud has been tested and optimized to support up to 20,000 Defenders per Console.
Scanning performance
This section describes the resources consumed by Prisma Cloud Defender during a scan. Measurements were taken on a test system with 1GB RAM, 8GB storage, and 1 CPU core.
Host scans
Host scans consume the following resources:
Memory
10-15%
CPU
1%
Time to complete a host scan
1 second
Container scans
Container scans consume the following resources:
Memory
10-15%
CPU
1%
Time to complete a container scan
1-5 seconds per container
Image scans
When an image is first scanned, Prisma Cloud caches its contents so that subsequent scans run more quickly. The first image scan, when there is no cache, consumes the following resources:
Memory
10-15%
CPU
2%
Time to complete an image scan.
1-10 seconds per image. (Images are estimated to be 400-800 MB in size.)
Scans of cached images consume the following resources:
Memory
10-15%
CPU
2%
Time to complete an image scan
1-5 seconds per image. (Images are estimated to be 400-800 MB in size.)
Real-world system performance
Each release, Prisma Cloud tests performance in a scaled out environment that replicates a real-world workload and configuration. The test environment is built on Kubernetes clusters, and has the following properties:
Hosts: 20,000
Hardware:
Console: 16 vCPUs, 50 GB memory
Defenders: 2 vCPUs, 8 GB memory
Operating system: Container-Optimized OS
Images: 323
Containers: 192,087 (density of 9.6 containers per host)
The results are collected over the course of 24 hours. The default vulnerability policy (alert on everything) and compliance policy (alert on critical and high issues) are left in place.
Resource consumption:
The following table shows normal resource consumption.
Console
1,474 MiB
8.0%
Defender
82 MiB
1.0%
WAAS performance benchmark
Minimum requirements
Results detailed in this document assume a Defender instance complying with these minimum requirements.
Methodology
Benchmark target servers
Benchmark target servers were run on AWS EC2 instances running Ubuntu Server 18.04 LTS
t2.large
Docker
Nginx vs WAAS-protected Nginx
Nginx/1.19.0
t2.large
Host
Nginx vs WAAS-protected Nginx
Nginx/1.14.0
t2.large
Kubernetes
Nginx vs WAAS-protected Nginx
Nginx/1.17.10
Benchmarking client
Benchmarking was performed using the hey load generating tool deployed on a ‘t2.large’ instance running Ubuntu Server 18.04 LTS
Benchmark scenarios
Test scenarios were run using hey against each server:
HTTP GET request
5,000
10, 100, 250, 500, 1,000
HTTP GET request with query parameters
5,000
10, 100, 250, 500, 1,000
HTTP GET request with an attack payload in a query parameter
5,000
10, 100, 250, 500, 1,000
HTTP GET with 1 MB response body
1,000
10, 100, 250, 500, 1,000
HTTP GET with 5 MB response body
1,000
10, 100, 250, 500, 1,000
HTTP POST request with body payload size of 100 bytes
5,000
10, 100, 250, 500, 1,000
HTTP POST request with body payload size of 1 KB
5,000
10, 100, 250, 500, 1,000
HTTP POST request with body payload size of 5 KB
5,000
10, 100, 250, 500, 1,000
In order to support 1,000 concurrent connections in large file scenarios, WAAS HTTP body inspection size limit needs to be set to 104,857 bytes
Results
HTTP transaction overhead
The following table details request average overhead (in milliseconds):
Environment | Concurrent Connections | |||||
10 | 100 | 250 | 500 | 1,000 | ||
Docker | HTTP GET request | 3 | 30 | 70 | 99 | 185 |
HTTP GET request with query parameters | 4 | 34 | 70 | 100 | 151 | |
GET w/ attack payload | 1 | 6 | 6 | 26 | 96 | |
GET - 1MB Response | 1 | -268 | -1314 | -3211 | -5152 | |
GET - 5MB Response | 15 | -1,641 | -6,983 | -9,262 | -18,231 | |
POST w/ 100B body | 5 | 42 | 84 | 119 | 194 | |
POST w/ 1KB body | 12 | 106 | 245 | 430 | 800 | |
POST w/ 5KB body | 42 | 402 | 970 | 1,853 | 3,189 | |
Host | HTTP GET request | 2 | 22 | 53 | 82 | 217 |
HTTP GET request with query parameters | 3 | 27 | 63 | 93 | 212 | |
GET w/ attack payload | 0 | 6 | 17 | 78 | 104 | |
GET - 1MB Response | -1 | -6 | 32 | 131 | -681 | |
GET - 5MB Response | 7 | -45 | -638 | -2,677 | -9,099 | |
POST w/ 100B body | 3 | 29 | 66 | 114 | 300 | |
POST w/ 1KB body | 10 | 97 | 234 | 436 | 774 | |
POST w/ 5KB body | 39 | 407 | 940 | 1,831 | 3,196 | |
Kubernetes | HTTP GET request | 3 | 29 | 58 | 78 | 155 |
HTTP GET request with query parameters | 4 | 33 | 79 | 114 | 288 | |
GET w/ attack payload | 0 | 5 | 15 | 63 | 177 | |
GET - 1MB Response | -4 | -252 | -981 | -2827 | -5754 | |
GET - 5MB Response | 15 | -1,653 | -5,254 | -14,966 | -23,828 | |
POST w/ 100B body | 5 | 39 | 92 | 130 | 280 | |
POST w/ 1KB body | 11 | 109 | 252 | 498 | 907 | |
POST w/ 5KB body | 43 | 421 | 1,013 | 2,005 | 3,557 | |
Negative numbers indicate a performance improvement. WAAS response time can be faster than origin-server response time when attacks are blocked and not forwarded to the origin server.
Load testing
The following table details average request time (in milliseconds) of 1,000,000 request benchmarking load (includes response time for both WAAS and underlying origin):
Environment | Concurrent Connections | |||||
10 | 100 | 250 | 500 | 1,000 | ||
Docker | HTTP GET request | 4 | 36 | 90 | 177 | 358 |
HTTP POST request, 100 Byte body | 5 | 47 | 116 | 232 | 472 | |
Host | HTTP GET request | 3 | 28 | 70 | 140 | 298 |
HTTP POST request, 100 Byte body | 4 | 40 | 99 | 197 | 397 | |
Kubernetes | HTTP GET request | 4 | 38 | 92 | 181 | 363 |
HTTP POST request, 100 Byte body | 5 | 49 | 119 | 236 | 460 | |
Last updated
Was this helpful?

